Accept Credit Cards Anywhere on Android- Pocket Spectrum Setup

We are now going to set up our Bluetooth Pocket Spectrum Credit Card Swiper and Receipt Printer on the Android.
		Reset Your Pocket Spectrum Plus Before you can pair the Pocket Spectrum with your Treo, the Pocket Spectrum should first be reset. To do this... 1. Turn off the Pocket Spectrum (if it is already on). 2. Press and Hold the ON button for at least 3 seconds. 3. When the paper starts advancing, release the ON button. A diagnostic sheet will be printed. 4. After the print out completes, the printer's Bluetooth memory is cleared and ready for pairing to your PDA. NOTICE: If you are REINSTALLING a Pocket Spectrum, this will erase the existing pairing. You MUST Un-pair the existing connection in your PDA before performing the next step.
		Tap on the "Settings" icon on your phone.
		Tap on "Wireless & Networks".
		Make sure Bluetooth is Checked (on) Then, just tap on "Bluetooth Settings".
		Tap on "Scan for Devices".
		Your phone will locate the Pocket Spectrum with a number beginning with "MPS" (for Mobile Pro Spectrum) Tap on this device.
		It will ask for the PIN. Tap inside the PIN box to bring up the keyboard, then select the numbers to enter the PIN: 1000 (as shown)
		You will see the printer listed as "Paired but Not Connected" This is what you want. The connection is made on an "As-Needed" basis by Pocket Pocket Verifier.
		Turn the printer off, then back on...
That's All it takes!! Easy as 1-2-3!