Pocket Spectrum Bluetooth credit card reader setup for Sony Ericsson

Bluetooth Magnetic Credit Card / Driver's License
Reader and Transaction Receipt Printer
SETUP FOR SONY ERICSSON

	Starting from the main menu:
	STEP 1: Reset your Pocket Spectrum. Before you can pair the Pocket Spectrum with your PDA, the Pocket Spectrum should first be reset. To do this... 1. Turn off the Pocket Spectrum (if it is already on). 2. Press and Hold the ON button for at least 3 seconds. 3. When the paper starts advancing, release the ON button. A diagnostic sheet will be printed. 4. After the print out completes, the printer' bluetooth memory is cleared and ready for pairing to your PDA. NOTICE: If you are REINSTALLING a Pocket Spectrum, this will erase the existing pairing. You MUST delete the connection in your PDA before performing the next step.
	Open Control Panel Click the Connections tab, then select Bluetooth.
	In the Bluetooth dialog, click the Settings tab and turn Bluetooth on.
	When Bluetooth is on, the Bluetooth icon will appear at the bottom of the screen. Turn on the Spectrum printer, then click on the Add button. After a brief instant, your phone will discover the Spectrum (Mobile Pro).
	Select Mobile Pro
	Enter the passkey when asked.
	Passkey: 1000
	Phone is now paired with the Spectrum. Make sure you select Spectrum as your Reader/Printer in the Settings area of your software. When the software is ready to use the Spectrum display a Bluetooth selection box. NOTE: AT THIS POINT TURN THE CARD READER OFF, WAIT A MINUTE, THEN TURN IT BACK ON.