Bluetooth Magnetic Credit Card / Driver's License
Reader and Transaction Receipt Printer
Setup for Motorola Q Smartphone

Just follow these simple steps to link the Pocket Spectrum Printer to your Motorola Q Smartphone. Retire the wire!

Important:
It is recommended that you pair the Spectrum with your device before launching Pocket Verifier.
 
Step 1: Reset your Pocket Spectrum
 
Announcing a complete breakthrough in mobile printer design! A true Line Printer (the paper moves underneath a motionless head) , rated not in characters, but MILES of paper in reliability (31 to be precise)! Powered by powerful, built-in Nickel - Metal Hydride rechargeable batteries, this printer literally throws receipts out at up to 2 inches per second!

 

Step 1: Reset your Pocket Spectrum.

Before you can pair the Pocket Spectrum with your device. the Pocket Spectrum should first be reset. To do this...

1. Turn off the Pocket Spectrum (if it is already on).
2. Plug in the charger for the Pocket Spectrum.
3. Press and Hold the ON button.
4. When the paper starts advancing, release the ON button.
    A diagnostic sheet will be printed.
5. After the print out completes, the printer is initialized.
   



 
Step 2: Turn ON your Bluetooth Connection
 

 

 1. Turn on your phone.
2. Press the Home button.
3. Locate and select
    Start > Bluetooth > Bluetooth Manager > Settings…
4. Under the Status heading select Bluetooth ON.
5. Select Done.

    You must press Done in order to start the connection.
    Once this is done. the Bluetooth connection is on and
    you are ready to go to the next step. 



 
Step 3: Pair your Device with the Pocket Spectrum
 

 

 1. From Bluetooth Manager, select Settings.
2. Select Menu > Paired Devices.
3. If more than one item appears in the list,
    select the Pocket Spectrum.
4. Enter the passkey: 1000
5. Press Done.
6. After a brief pause select Menu > Properties.
7. Check On Connections authorized.
    You can also give the device a nickname.
    In this example SPECTRUM is used.

8. Select Done.
9. Press the Home key.

The Pocket Spectrum is now setup on COM1. This is the default COM Port and cannot be changed. The Spectrum can now be setup and connected through the Pocket Verifier software.

 NOTE: AT THIS POINT TURN THE CARD READER OFF, WAIT A MINUTE, THEN TURN IT BACK ON.
Step 4: Setup the Connection in Pocket Verifier
 

 

 1. Start Pocket Verifier.
2. Logon and go to the Main Index screen.
3. Select Settings.
4. Make sure Use Pocket Spectrum is checked On.
5. Select Menu > Check Bluetooth Connection.
6. When asked to confirm your connection, select Yes.

At the next prompt, make sure the Pocket Spectrum is on and continue.

It is also recommended that you perform a small print test at this stage to make sure your Pocket Spectrum is functioning properly before using it in the field. After a brief pause the Pocket Spectrum will be setup.

 
 

Your Smartphone is now setup to work with our Pocket Verifier software.  

For additional information and tips using your Bluetooth connection to swipe and process credit cards as well as information on troubleshooting the Pocket Spectrum with the Motorola Q, please read the User Guide and Tutorial.

 



Copyright © 2001-2006 Advanced Merchant Solutions, Inc. All Rights Reserved.
All artwork, logos, Pocket Verifier, PC Verifier, and MerchantAnywhere.com are trademarks of Advanced Merchant Solutions, Inc.