VeriFone Check Reader and Printer

PC Verifier can be used with the VeriFone P250 printer and CR600 check reader. Each device can be used separately or together. To use the VeriFone printer, make sure that the printer setup is set to factory defaults (9600 baud, 7 bit, even parity – see page 5 of the Printer 250 Installation Guide that came with your VeriFone Printer). PC Verifier also supports the Verifone P900 printer, however, the setup is slightly different, please consult the documentation that came with this printer on how to setup the system.

If you are using both the VeriFone P250 printer and CR600 check reader, attach the P250 to the CR600, then attached the CR600 to an available port.

For technical support on VeriFone devices, visit the VeriFone Web site at:
http://www.verifone.com.

Note: Due to the nature of the Windows multitasking environment and the communications settings of the VeriFone P250 printer, it is recommended that you do not try to perform additional tasks in windows during the receipt printing process. Depending on the type of hardware setup on your workstation, multitasking may cause the printer to loose some information being sent through the communications port. This could result in incorrectly formatted receipts.